Age Gate

Sorry Adults Only

KITS

Buy Brand E Cigarette Starter Kit

16 Item(s)

Set Descending Direction
per page

Grid  List 

  1. Aspire NX30 - Black

    Aspire NX30 - Black

    The NX30 mod is a compact mod that can be used when on the go. Powered by a built-in LiPo battery, the NX30 supports up to 30 watts. The NX30 is the perfect size for low profile tanks. Take this essential battery mod wherever you travel for a more convenient vape.

    NX30 Package Contents

    1x NX30 Mod
    1x eGo adapter
    1x Lanyard Strap
    1x USB Cable
    1x User Manual
    1x Warranty Card

     

     

     

     


    Learn More
    • Now £39.99

      RRP £41.99

  2. Aspire NX80 KIT - stainless steel (Sub-Ohm Central Exclusive!)

    Aspire NX80 KIT - stainless steel (Sub-Ohm Central Exclusive!)

    EUROPEAN EXCLUSIVE !
    MADE FROM A SINGLE PIECE OF STAINLESS STEEL

    The NX80 mod by Aspire features is machined from a solid ingot of stainless steel and it's refined lines and high-level design accents throughout the design. The five button system is ultra-intuitive with one-button navigation between Temperature Control and Wattage mode. The NX80 series mods feature an all-new Customizable Firing Button Profiles (CFBP) function. CFBP allows for heat ramp-up (power curve) to be fine-tuned. This customization can be made with just a few button clicks.

    This is almost like the NX75... just better! 

    KIT content:
    1x NX80 Mod
    1x Aspire Nautilus Tank
    1x Aspire 18650 Battery (2500mAh)
    1x 20ml FREE e-liquid
    1x USB Type-C Cable
    1x User Manual
    1x Warranty Card

    Specifications:
    Battery type: 18650

    Battery Size: 75mm x 22mmx 35mm
    Max Wattage: 80W
    Connection Threading: 510

    Aspire NX80 mod

     

     

    The NX80 also features Child Lock.
    The NX80 is made from a solid piece of stainless steel

    Aspire NX80 mod

     

     

    The NX80 allows you to customize your mod with just a few button clicks.

    No firmware or connecting to computer required! Ease-of-Use is a key feature of the NX80. Change Logo function:Press”T”and”-”simultaneously for 2 seconds to enter or exit change logo settings.Press ”+ or -” to select letters,press fire button to confirm,”W” button to delete,and button ”T” to select between lowercase and capital letters. The NX80 also features Child Lock. Aside from firmware upgrades, all operations can be done with just a few click of the NX80 buttons.

    Aspire NX80

     

     

    Aspire NX80 Battery Installation

    Insert the Aspire 18650 battery into magnet door positive (+) down. Attach the battery door onto the NX805 mod.

    Aspire NX80 mod

     

     

     

     

    NX80 Firmware Updates

    The NX80 mod is a firmware upgradeable device. There will be many hot new features released via firmware so stay tuned.

     NX80 firmware update

     

     

    READ SOME ONLINE REVIEWS ON ASPIRE NX80:

    http://ukvapers.org/Thread-Text-Review-Prof-Reviews-the-Aspire-NX80
    http://www.thevapersden.com/index.php/topic,12136.0.html
    http://thevapersshed.boards.net/thread/7670/aspire-nx80
    http://allaboute-cigarettes.proboards.com/thread/64970/prof-reviews-aspire-nx80


    Learn More
    • Now £69.99

      RRP £95.00

  3. Aspire Plato replacement glass

    Aspire Plato replacement glass

    Aspire Plato replacement glass

    A replacement glass tube for the Aspire Plato mod kit.

     

    Contents:
    1 x Aspire Plato replacement glass tube

     


    Learn More
    • Now £0.99

      RRP £2.99

  4. Aspire Zelos 50W box - black

    Aspire Zelos 50W box - black

    Zelos, a compact and ergonomic vaping mod from Aspire powered by a 2500mah built-in Lipo battery.
    Wattage can reach up to 50W. It's a variable voltage and wattage device. In addition to its precise TC settings, the new firmware ensures its wattage can also be adjusted under TC mode, with all that together added in a stylish design, making the Zelos a smart choice for your vaping needs.


    Learn More
    • £41.99
  5. Aspire Zelos 50W box - grey

    Aspire Zelos 50W box - grey

    Zelos, a compact and ergonomic vaping mod from Aspire powered by a 2500mah built-in Lipo battery.
    Wattage can reach up to 50W. It's a variable voltage and wattage device. In addition to its precise TC settings, the new firmware ensures its wattage can also be adjusted under TC mode, with all that together added in a stylish design, making the Zelos a smart choice for your vaping needs.


    Learn More
    • £41.99
  6. Blast from the Past - 905 Starter Kit

    Blast from the Past - 905 Starter Kit

    Blast from the Past - 901 starter kit
    After almost 10 years, the 901 is still one of our best-seller so we decided to introduce a brand new 901 starter kit.


    Learn More
    • £49.99
  7. ELEAF AND ASPIRE NAUTILUS KIT WITH FREE JUICE

    ELEAF AND ASPIRE NAUTILUS KIT WITH FREE JUICE

    ELEAF AND ASPIRE NAUTILUS KIT WITH FREE JUICE 2200mAh Battery Capacity The 2200mAh e-cigarette battery features variable voltage from 2.0-8.0V (5-30W) for customised vapour production and supports atomizers with a resistance of 0.4-5ohms. OLED Screen The OLED screen on the side of the battery displays the voltage / wattage the device is set to and the remaining battery charge, atomizer resistance and inhalation duration. Stainless Steel Thread The 5 click power button prevents accidental activation and with a 510 thread connection made from stainless steel the iStick 30W is compatible with a wide range of atomizer tanks. NAUTILUS TANK The Nautilus Mini is the next generation of tank systems. Made of stainless steel and Pyrex glass, the Nautilus Mini uses the Aspire “BVC” (Bottom Vertical Coil) atomizer technology. This new technology is designed to last longer while still giving users the purest and cleanest taste from e-liquids. The Nautilus Mini includes an improved four-port adjustable airflow system that is both user friendly and reliable. This unique four-port system allows the user to adjust the draw, warmth of vapor, and amount of vapor produced. The Nautilus Mini design also makes it easy to carry, install, and refill.

    Learn More
    • £55.55

  8. Eleaf iStick 30W - Black

    Eleaf iStick 30W - Black

    iStick 30W is upgraded based on iStick through expanding the range of output voltage and wattage. Under the support of 2200mAh battery capacity, it will give you great performance between 2V-8V or 5W-30W. Newly introduced spring connector, wear-resistant stainless steel thread, and streamlined design on top make iStick 30W more suitable for atomizers. More ever, the added button lock functionality protects the buttons and prolong their service life. iStick 30W is the one you deserve to own.

    Eleaf iStick 30W

     

     

    Size: 23.0mm * 32.5 mm * 77.0mm
    Capacity: 2200mAh
    Thread Type: 510 Thread

    Rated output voltage: 2.0V-8.0V
    Rated output wattage: 5W-30W
    Rated resistance range: 0.4Ω-5Ω

     

    Kit Content:
    1 x iStick 30W battery
    1 x eGo Threading Connector
    1 x AC-USB adapter
    1 x USB cable
    1 x User Manual

     

    Features:

    1. Expanded range of output voltage/wattage: With the voltage lowest to 2V and highest to 8V, wattage lowest to 5W and highest to 30W, iStick 30W can support sub ohm coil, getting ahead of other products at the same level.

    2. Spring Connector and Stainless Steel Thread: Newly introduced spring connector insures high adaptability and durability. The connecting thread is made of stainless steel which makes it more hard-wearing.

    3. New Streamlined Design on Top: This kind of design enable iStick 30W to be assembled perfectly with 22mm/23mm diameter atomizers.

    4. Arrow Button Lock Functionality: Keep pressing the up-arrow button and down arrow button simultaneously for 2 seconds when the battery is on, they will be locked to avoid unintentional presses. You can do the same operation to unlock them.

    5. Continuation of iStick Advantages: OLED display, adjustable voltage/wattage, large battery capacity. These advantages that make you love iStick will all be found in iStick 30W.

     Eleaf iStick 30W

     

     

    Operation Guide

    How to charge?
    iStick 30W can be charged through USB port at the bottom of battery. It will take 2.5 hours to charge the battery with 1A wall adaptor.


    Adjust the voltage/wattage

    Press the up-and-down arrow buttons to increase or decrease the voltage/wattage. Keep pressing the up/down arrow button, voltage/wattage will increase or decrease slowly at first, then they will increase/decrease at a constant high speed. The number will stop increasing/decreasing when you loosen the up/down arrow button.


    Lock and Unlock

    Keep pressing up-arrow button and down-arrow button simultaneously for 2 seconds when the battery is on, then they will be locked and the screen will reflect “Lock”. Still keep pressing simultaneously for 2 seconds to unlock them and the screen will reflect “Unlock”. Through these operations, you can protect the buttons from unintentional presses and prolong their service life.


    Switch the display mode

    Keep pressing up-arrow button and down-arrow button simultaneously for 2 seconds when the battery is off, the screen display will rotate 180 degrees. You can view the screen from two kinds of angle through this operation.


    Over 10s Protection

    If you keep pressing the button for over 10 seconds, the output will shut off and the OLED screen will reflect “Over 10s”.


    Atomizer Short-circuit Protection

    When atomizer short-circuit occurs, the OLED screen will reflect “Atomizer Short”.
    Low-voltage Protection: When the voltage of battery is below 3.3V, the OLED screen will reflect “Lock”.


    Unlock the Low-voltage Protection

    When the voltage of battery is above 3.7V, the low-voltage protection will be unlocked.


    Low power Alert

    If the power of battery is lower than 10%, the power symbol on the screen will flash.

     

     


    Learn More
    • Now £35.00

      RRP £40.00

  9. Eleaf iStick 30W - Blue

    Eleaf iStick 30W - Blue

    iStick 30W is upgraded based on iStick through expanding the range of output voltage and wattage. Under the support of 2200mAh battery capacity, it will give you great performance between 2V-8V or 5W-30W. Newly introduced spring connector, wear-resistant stainless steel thread, and streamlined design on top make iStick 30W more suitable for atomizers. More ever, the added button lock functionality protects the buttons and prolong their service life. iStick 30W is the one you deserve to own.

    Eleaf iStick 30W

     

     

    Size: 23.0mm * 32.5 mm * 77.0mm
    Capacity: 2200mAh
    Thread Type: 510 Thread

    Rated output voltage: 2.0V-8.0V
    Rated output wattage: 5W-30W
    Rated resistance range: 0.4Ω-5Ω

     

    Kit Content:
    1 x iStick 30W battery
    1 x eGo Threading Connector
    1 x AC-USB adapter
    1 x USB cable
    1 x User Manual

     

    Features:

    1. Expanded range of output voltage/wattage: With the voltage lowest to 2V and highest to 8V, wattage lowest to 5W and highest to 30W, iStick 30W can support sub ohm coil, getting ahead of other products at the same level.

    2. Spring Connector and Stainless Steel Thread: Newly introduced spring connector insures high adaptability and durability. The connecting thread is made of stainless steel which makes it more hard-wearing.

    3. New Streamlined Design on Top: This kind of design enable iStick 30W to be assembled perfectly with 22mm/23mm diameter atomizers.

    4. Arrow Button Lock Functionality: Keep pressing the up-arrow button and down arrow button simultaneously for 2 seconds when the battery is on, they will be locked to avoid unintentional presses. You can do the same operation to unlock them.

    5. Continuation of iStick Advantages: OLED display, adjustable voltage/wattage, large battery capacity. These advantages that make you love iStick will all be found in iStick 30W.

     Eleaf iStick 30W

     

     

    Operation Guide

    How to charge?
    iStick 30W can be charged through USB port at the bottom of battery. It will take 2.5 hours to charge the battery with 1A wall adaptor.


    Adjust the voltage/wattage

    Press the up-and-down arrow buttons to increase or decrease the voltage/wattage. Keep pressing the up/down arrow button, voltage/wattage will increase or decrease slowly at first, then they will increase/decrease at a constant high speed. The number will stop increasing/decreasing when you loosen the up/down arrow button.


    Lock and Unlock

    Keep pressing up-arrow button and down-arrow button simultaneously for 2 seconds when the battery is on, then they will be locked and the screen will reflect “Lock”. Still keep pressing simultaneously for 2 seconds to unlock them and the screen will reflect “Unlock”. Through these operations, you can protect the buttons from unintentional presses and prolong their service life.


    Switch the display mode

    Keep pressing up-arrow button and down-arrow button simultaneously for 2 seconds when the battery is off, the screen display will rotate 180 degrees. You can view the screen from two kinds of angle through this operation.


    Over 10s Protection

    If you keep pressing the button for over 10 seconds, the output will shut off and the OLED screen will reflect “Over 10s”.


    Atomizer Short-circuit Protection

    When atomizer short-circuit occurs, the OLED screen will reflect “Atomizer Short”.
    Low-voltage Protection: When the voltage of battery is below 3.3V, the OLED screen will reflect “Lock”.


    Unlock the Low-voltage Protection

    When the voltage of battery is above 3.7V, the low-voltage protection will be unlocked.


    Low power Alert

    If the power of battery is lower than 10%, the power symbol on the screen will flash.

     

     


    Learn More
    • Now £35.00

      RRP £40.00

  10. Eleaf iStick 30W - Pink

    Eleaf iStick 30W - Pink

    iStick 30W is upgraded based on iStick through expanding the range of output voltage and wattage. Under the support of 2200mAh battery capacity, it will give you great performance between 2V-8V or 5W-30W. Newly introduced spring connector, wear-resistant stainless steel thread, and streamlined design on top make iStick 30W more suitable for atomizers. More ever, the added button lock functionality protects the buttons and prolong their service life. iStick 30W is the one you deserve to own.

    Eleaf iStick 30W

     

     

    Size: 23.0mm * 32.5 mm * 77.0mm
    Capacity: 2200mAh
    Thread Type: 510 Thread

    Rated output voltage: 2.0V-8.0V
    Rated output wattage: 5W-30W
    Rated resistance range: 0.4Ω-5Ω

     

    Kit Content:
    1 x iStick 30W battery
    1 x eGo Threading Connector
    1 x AC-USB adapter
    1 x USB cable
    1 x User Manual

     

    Features:

    1. Expanded range of output voltage/wattage: With the voltage lowest to 2V and highest to 8V, wattage lowest to 5W and highest to 30W, iStick 30W can support sub ohm coil, getting ahead of other products at the same level.

    2. Spring Connector and Stainless Steel Thread: Newly introduced spring connector insures high adaptability and durability. The connecting thread is made of stainless steel which makes it more hard-wearing.

    3. New Streamlined Design on Top: This kind of design enable iStick 30W to be assembled perfectly with 22mm/23mm diameter atomizers.

    4. Arrow Button Lock Functionality: Keep pressing the up-arrow button and down arrow button simultaneously for 2 seconds when the battery is on, they will be locked to avoid unintentional presses. You can do the same operation to unlock them.

    5. Continuation of iStick Advantages: OLED display, adjustable voltage/wattage, large battery capacity. These advantages that make you love iStick will all be found in iStick 30W.

     Eleaf iStick 30W

     

     

    Operation Guide

    How to charge?
    iStick 30W can be charged through USB port at the bottom of battery. It will take 2.5 hours to charge the battery with 1A wall adaptor.


    Adjust the voltage/wattage

    Press the up-and-down arrow buttons to increase or decrease the voltage/wattage. Keep pressing the up/down arrow button, voltage/wattage will increase or decrease slowly at first, then they will increase/decrease at a constant high speed. The number will stop increasing/decreasing when you loosen the up/down arrow button.


    Lock and Unlock

    Keep pressing up-arrow button and down-arrow button simultaneously for 2 seconds when the battery is on, then they will be locked and the screen will reflect “Lock”. Still keep pressing simultaneously for 2 seconds to unlock them and the screen will reflect “Unlock”. Through these operations, you can protect the buttons from unintentional presses and prolong their service life.


    Switch the display mode

    Keep pressing up-arrow button and down-arrow button simultaneously for 2 seconds when the battery is off, the screen display will rotate 180 degrees. You can view the screen from two kinds of angle through this operation.


    Over 10s Protection

    If you keep pressing the button for over 10 seconds, the output will shut off and the OLED screen will reflect “Over 10s”.


    Atomizer Short-circuit Protection

    When atomizer short-circuit occurs, the OLED screen will reflect “Atomizer Short”.
    Low-voltage Protection: When the voltage of battery is below 3.3V, the OLED screen will reflect “Lock”.


    Unlock the Low-voltage Protection

    When the voltage of battery is above 3.7V, the low-voltage protection will be unlocked.


    Low power Alert

    If the power of battery is lower than 10%, the power symbol on the screen will flash.

     

     


    Learn More
    • Now £35.00

      RRP £40.00

  11. Eleaf iStick 30W - Silver

    Eleaf iStick 30W - Silver

    iStick 30W is upgraded based on iStick through expanding the range of output voltage and wattage. Under the support of 2200mAh battery capacity, it will give you great performance between 2V-8V or 5W-30W. Newly introduced spring connector, wear-resistant stainless steel thread, and streamlined design on top make iStick 30W more suitable for atomizers. More ever, the added button lock functionality protects the buttons and prolong their service life. iStick 30W is the one you deserve to own.

    Eleaf iStick 30W

     

     

    Size: 23.0mm * 32.5 mm * 77.0mm
    Capacity: 2200mAh
    Thread Type: 510 Thread

    Rated output voltage: 2.0V-8.0V
    Rated output wattage: 5W-30W
    Rated resistance range: 0.4Ω-5Ω

     

    Kit Content:
    1 x iStick 30W battery
    1 x eGo Threading Connector
    1 x AC-USB adapter
    1 x USB cable
    1 x User Manual

     

    Features:

    1. Expanded range of output voltage/wattage: With the voltage lowest to 2V and highest to 8V, wattage lowest to 5W and highest to 30W, iStick 30W can support sub ohm coil, getting ahead of other products at the same level.

    2. Spring Connector and Stainless Steel Thread: Newly introduced spring connector insures high adaptability and durability. The connecting thread is made of stainless steel which makes it more hard-wearing.

    3. New Streamlined Design on Top: This kind of design enable iStick 30W to be assembled perfectly with 22mm/23mm diameter atomizers.

    4. Arrow Button Lock Functionality: Keep pressing the up-arrow button and down arrow button simultaneously for 2 seconds when the battery is on, they will be locked to avoid unintentional presses. You can do the same operation to unlock them.

    5. Continuation of iStick Advantages: OLED display, adjustable voltage/wattage, large battery capacity. These advantages that make you love iStick will all be found in iStick 30W.

     Eleaf iStick 30W

     

     

    Operation Guide

    How to charge?
    iStick 30W can be charged through USB port at the bottom of battery. It will take 2.5 hours to charge the battery with 1A wall adaptor.


    Adjust the voltage/wattage

    Press the up-and-down arrow buttons to increase or decrease the voltage/wattage. Keep pressing the up/down arrow button, voltage/wattage will increase or decrease slowly at first, then they will increase/decrease at a constant high speed. The number will stop increasing/decreasing when you loosen the up/down arrow button.


    Lock and Unlock

    Keep pressing up-arrow button and down-arrow button simultaneously for 2 seconds when the battery is on, then they will be locked and the screen will reflect “Lock”. Still keep pressing simultaneously for 2 seconds to unlock them and the screen will reflect “Unlock”. Through these operations, you can protect the buttons from unintentional presses and prolong their service life.


    Switch the display mode

    Keep pressing up-arrow button and down-arrow button simultaneously for 2 seconds when the battery is off, the screen display will rotate 180 degrees. You can view the screen from two kinds of angle through this operation.


    Over 10s Protection

    If you keep pressing the button for over 10 seconds, the output will shut off and the OLED screen will reflect “Over 10s”.


    Atomizer Short-circuit Protection

    When atomizer short-circuit occurs, the OLED screen will reflect “Atomizer Short”.
    Low-voltage Protection: When the voltage of battery is below 3.3V, the OLED screen will reflect “Lock”.


    Unlock the Low-voltage Protection

    When the voltage of battery is above 3.7V, the low-voltage protection will be unlocked.


    Low power Alert

    If the power of battery is lower than 10%, the power symbol on the screen will flash.

     

     


    Learn More
    • Now £35.00

      RRP £40.00

  12. Joecig XTC3 PCC

    Joecig XTC3 PCC

    The smallest clear atomizer ever with real cigarette size.
    The PCC case, with its internal 1100mah allows you to charge your ecigs on the go many and many times.

    Joecig XTC3 PCC

    The LCD screen display shows you the charging status of your ecig and the PCC itself.
    You can charge your PCC case and your ecig at the same time with a single USB cable or the wall charger (sold separately) or you can charge a single battery with the USB battery charger (included). The battery, once inserted in the PCC case, is magnetically connected for charge!

    The PCC case also allows you to carry up to 3 pre-filled atomizer, so you won't run out of your favourite eliquid!

    - Smart PCC case 1100mah
    - Easy carrying
    - Top filling
    - Stylish!

    KIT CONTENT:
    1x 1100mAh PCC case
    2x 90mah battery
    3x Clear Atmomizers
    1x PCC USB charger
    1x USB charger

    Joecig XTC3 PCC

    SPECIFICATIONS:
    Size
    :  85 x 7.7 mm
    E-cig battery capacity: 90mah
    PCC capacity: 1100mah
    Clear atomizer volume: 0.3ml


    Learn More
    • £34.99
  13. SMOK KOOPOR PRIMUS 300W - BLACK

    SMOK KOOPOR PRIMUS 300W - BLACK

    Triple High-Drain 18650 Battery - Sold Separately Output Wattage Range: 1~300W Output Voltage Range: 0.8~12V 55A Maximum Output Minimum Atomizer Resistance: 0.06ohm Temperature Range: 100-600F Ni200, Titanium,, and Stainless Steel Compatibility Intelligent Atomizer Recognition Temperature Coefficient of Resistance (TCR) Superior Stainless Steel Construction Enlarged Intuitive OLED Display Three Button Operation Sliding Battery Door Heat Ventilation Holes Across Design MicroUSB Port - Firmware Upgrades Puff Monitoring System 12 Second Cut-Off Short Circuit Protection Over Heat Protection Low Battery Warning 510 Connection Available in Stainless Steel and Black

    Learn More
    • Now £29.99

      RRP £35.00

  14. SMOK X CUBE MINI 75W (BLACK)

    SMOK X CUBE MINI 75W (BLACK)

    SMOK X CUBE Mini is the mini version of X CUBE II. As one of the most accurate temperature-control mods, X CUBE Mini features three new functions: intelligent coil recognition, adjustable temperature coefficient of resistance and adjustable initial resistance, which are designed to bring your vaping experience to the next level. It has 75W maximum output, Bluetooth 4.0 technology, and a customizable LED that potentially illuminates in up to 16 million colors. And there many more functions are waiting for you to discover.

    Learn More
    • Now £25.99

      RRP £30.00

  15. V-Spin KIT

    V-Spin KIT

    Arriving in Novemeber.

    Aspire Vivi Nova mini (2ml) 1.8ohms & Evod 650mAh Twist Battery


    Learn More
    • £14.99
  16. VANDY VAPE - NS PEN

    VANDY VAPE - NS PEN

    KIT CONTAINS 

    1X NS PEN

    1X QC USB CABLE

    1X WARRENTY CARD

    1X NS SS316L COIL

    1X NS CERAMIC COIL

    1X SPARE PARTS BAG

    1X INSTRUCTIONS MANUAL


    Learn More
    • Now £16.99

      RRP £20.00

16 Item(s)

Set Descending Direction
per page

Grid  List 

To top